| |
Oil Testing Centrifuge |
| |
 |
 |
The range of centrifuge is specially designed for use in Oil Testing for tests as per ASTM and IP standards. The unit is fabricated from steel and epoxy coated. Different models and their features are : |
| |
| Table Top Model: |
- Step less speed regulator.
- Digital speed indicator.
- 1-99 minutes digital timer and infinite mode.
- Zero start interlock.
- Imbalance safety cut off.
- Safety Lid switch.
- Dynamic Brake
|
| Micro Processor Model |
- Microprocessor control with brush less noise AC induction motor and variable frequency drive.
- Soft touch keyboard.
- 99 program memory
- Speed with 10 RPM increment.
- Timer with I minute increment.
- Programmable Acceleration / Deceleration (range 60-720 seconds).
- Seletor switch for display of working speed / RCF value.
- Other indicators: remaining time, rotor in motion, imbalance, safety lid open.
- Safety electrical and mechanical lick with programmed emergency release mechanism.
|
| Technical Parameter |
Model |
Unit |
Micro Processor model |
Table Top Model |
Max. Speed |
RPM |
3000 |
3000 |
Max RCF |
xg |
1760 |
1480 |
Max. Tube Cap. |
ml |
100 |
100 |
Max. Capacity |
ml |
600 |
400 |
Width |
mm |
650 |
505 |
Depth |
mm |
700 |
580 |
Height |
mm |
745 |
525 |
Weight |
kg |
110 |
70 |
Connected Load |
kVA |
- |
- |
|
| |
| Swing Out Rotor Heads with carriers suitable for use with Table Top Models |
Capacity |
Type of Tests |
RPM |
RCF |
4 Place S/O for 100ml Pear shaped tubes |
ASTM-D-96 |
3000 |
1480 |
4 Place S/O for 100 ml Taper bottom tubes, sulfonation flask & bab cock bottles. |
ASTM-D-91, ASTM-D-96, ASTM-D-1796, ASTM-D-893, IP-75-57, ASTM-D-483, ASTM-D-484, ASTM-D-1019, IP-145 |
3000 |
1480 |
|
| |
| Swing Out Rotor Heads with carriers suitable for use with Microprocessor Models |
Capacity |
Type of Tests |
RPM |
RCF |
6 Place S/O for 100ml Pear shaped tubes |
ASTM-D-96 |
3000 |
1760 |
6 Place S/O for 100 ml Taper bottom tubes, sulfonation flask & bab cock bottles. |
ASTM-D-91, ASTM-D-96, ASTM-D-1796, ASTM-D-893, IP-75-57, ASTM-D-483, ASTM-D-484, ASTM-D-1019, IP-145 |
3000 |
1760 |
|
| |
| Standard Tests |
Water & Sediments in crude oil |
ASTM-D-96 |
800 |
10 Mts. |
Water & Sediments in petroleum products |
IP-75 |
800 |
10 Mts. |
Water & Sediments in fuel oils |
ASTM-D-1796 |
800 |
10 Mts. |
Precipitation number of lubricating oils |
ASTM-D-91 |
700 |
10 Mts. |
Stoddard solvent |
ASTM-D-483 |
100 |
- |
Olefinic plus aromatic hydrocarbons in petroleum distillates |
ASTM-D-1019 |
400 |
15 Mts. |
Olefinic plus aromatic contents |
ASTM-D-893 |
700 |
20 Mts. |
Unsulfonated residue of petroleum plant |
ASTM-D-483 |
100 |
10 Mts. |
Residue in liquefied petroleum (L.P.) |
- |
800 |
10 Mts. |
Trace sediments in lubricating oil |
- |
700 |
10 Mts. |
|
| |
|
|
